NorthStar 6000i, Installation Manual

Page: 11 / 56

SECTION TWO: Installing and wiring the 6000i
6000i
Installation Manual, Rev. G Page 7
Flush-mounting
When flush mounting, leave sufficient clearance space behind the unit for all of the cables and
connectors. Clearance is also required on the right side of the unit for opening the chart cartridge
door (not necessary for the 12” or 15” units). Flush mounting requires good ventilation behind the
mounting panel. Poor ventilation may cause the
6000i to overheat, which, in turn, will cause the
screen brightness to dim. For overall width and height requirements, see the Northstar 6000i
10.5
4.4
14.0
10.5
12"
Figure 4: Dimensions (12” unit)
Dimensions in inches
Figure 5: Dimensions (15” unit)
Dimensions in inches
(Flush-mount only)
(Flush-mount only)