Northern TVIDVR16 User Manual Download Page 65

Page: 65 / 176

User Manual of Digital Video Recorder

5.4

Configuring Alarm Triggered Record

Purpose:

Follow the procedure to configure alarm triggered recording.

Steps:

Enter the Alarm setting interface.

Menu> Configuration> Alarm

Figure 5. 15

Alarm Settings

Click the

Alarm Input

tab.

Figure 5. 16

Alarm Settings- Alarm Input

Select Alarm Input number and configure alarm parameters.

Choose N.O (normally open) or N.C (normally closed) for alarm type.

Check the checkbox of Setting.

Click the

button.

Figure 5. 17

Alarm Handling

Choose the alarm triggered recording channel.

Check the checkbox

to select channel.

Click

Apply

to save settings.

Click

to back to the upper level menu.

Summary of Contents for TVIDVR16

















































































































































































Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands

Northern TVIDVR16, User Manual

Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands