Northern TVIDVR16 User Manual Download Page 73

Page: 73 / 176

User Manual of Digital Video Recorder

5.8

Files Protection

Purpose:

You can lock the recorded files or set the HDD property to Read-only to protect the record files from being

overwritten.

Protect file by locking the record files

Steps:

Enter Playback setting interface.

Menu> Export

Figure 5. 27

Export

Select the channels you want to investigate by checking the checkbox to

Configure the record type, file type, start time and end time.

Click

Search

to show the results.

Figure 5. 28

Export- Search Result

Protect the record files.

Find the record files you want to protect, and then click the

icon which will turn to

indicating that the file is locked.

The record files of which the recording is still not completed cannot be locked.

Click

to change it to

to unlock the file and the file is not protected.

Protect file by setting HDD property to Read-only

Before you start:

Summary of Contents for TVIDVR16

















































































































































































Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands

Northern TVIDVR16, User Manual

Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands