Northern TVIDVR16 User Manual Download Page 90

Page: 90 / 176

User Manual of Digital Video Recorder

7.1

Backing up Record Files

Before you start:

Please insert the backup device(s) into the device.

7.1.1

Backing up by Normal Video Search

Purpose:

The record files can be backed up to various USB devices, such as USB flash drives, USB HDDs, and USB

writer.

Backup using USB flash drives, USB HDDs, and USB writer

Steps:

Enter Export interface.

Menu>Export>Normal

Figure 7. 1

Normal Export Interface

Set search condition and click

Search

button to enter the search result interface.

Figure 7. 2

Result of Normal Video Search for Backup

Select record files you want to back up.

Click button

to play the record file if you want to check it.

Check the checkbox before the record files you want to back up.

The size of the currently selected files is displayed in the lower-left corner of the window.

Summary of Contents for TVIDVR16

















































































































































































Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands

Northern TVIDVR16, User Manual

Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands