Northern TVIDVR16 User Manual Download Page 48

Page: 48 / 176

User Manual of Digital Video Recorder

4.2

Setting PTZ Presets, Patrols & Patterns

Before you start:

Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.

4.2.1

Customizing Presets

Purpose:

Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes

place.

Steps:

Enter the PTZ Control interface.

Menu>Camera>PTZ

Figure 4. 3

PTZ Settings

Use the directional button to wheel the camera to the location where you want to set preset; and the zoom

and focus operations can be recorded in the preset as well.

Enter the preset No. (1~255) in the preset text field, and click the

Set

button to link the location to the

preset.

Repeat the steps2-3 to save more presets.

You can click the

Clear

button to clear the location information of the preset, or click the

Clear All

button

to clear the location information of all the presets.

4.2.2

Calling Presets

Purpose:

This feature enables the camera to point to a specified position such as a window when an event takes place.

Steps:

Summary of Contents for TVIDVR16

















































































































































































Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands

Northern TVIDVR16, User Manual

Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands