Northern TVIDVR16 User Manual Download Page 161

Page: 161 / 176

User Manual of Digital Video Recorder

160

12.6

Restoring Default Settings

Steps:

Enter the Default interface.

Menu > Maintenance > Default

Figure 12. 9

Restore Defaults

Select the restoring type from the following three options.

Restore Defaults:

Restore all parameters, except the network (including IP address, subnet mask,

gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the

factory default settings.

Factory Defaults:

Restore all parameters to the factory default settings.

Restore to Inactive:

Restore the device to the inactive status.

Click the

button to restore the default settings.

The device will reboot automatically after restoring to the default settings.

Summary of Contents for TVIDVR16

















































































































































































Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands

Northern TVIDVR16, User Manual

Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands