Northern TVIDVR16 User Manual Download Page 145

Page: 145 / 176

User Manual of Digital Video Recorder

144

10.5

Configuring Quota Mode

Purpose

Each camera can be configured with allocated quota for the storage of recorded files.

Steps

Enter the Storage Mode interface.

Menu > HDD > Advanced

Set the

Mode

to Quota, as shown in Figure 10. 18.

The DVR must be rebooted to enable the changes to take effect.

Figure 10. 18

Storage Mode Settings Interface

Select a camera for which you want to configure quota.

Enter the storage capacity in the text field of

Max. Record Capacity (GB)

You can copy the quota settings of the current camera to other cameras if required. Click the

Copy

button to

enter the Copy Camera interface, as shown in Figure 10. 19.

Figure 10. 19

Copy Settings to Other Camera(s)

Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of

Analog to select all cameras.

Click the

button to finish the Copy settings and back to the Storage Mode interface.

Click the

Apply

button to apply the settings.

If the quota capacity is set to

, then all cameras will use the total capacity of HDD for record.

Summary of Contents for TVIDVR16

















































































































































































Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands

Northern TVIDVR16, User Manual

Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands