Northern TVIDVR16 User Manual Download Page 127

Page: 127 / 176

User Manual of Digital Video Recorder

126

9.2.6

Configuring More Settings

Steps:

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

More Settings

tab to enter the More Settings interface.

Figure 9. 21

More Settings Interface

Configure the remote alarm host, server port, HTTP port, multicast, RTSP port.



Alarm Host IP/Port

: With a remote alarm host configured, the device will send the alarm event or

exception message to the host when an alarm is triggered. The remote alarm host must have the

CMS (Client Management System) software installed.

The

Alarm Host IP

refers to the IP address of the remote PC on which the CMS (Client

Management System) software (e.g., iVMS-4200) is installed, and the

Alarm Host Port

must be the

same as the alarm monitoring port configured in the software (default port is 7200).



Multicast IP

: The multicast can be configured to realize live view for more than the maximum

number of cameras through network. A multicast address spans the Class-D IP range of 224.0.0.0 to

239.255.255.255. It is recommended to use the IP address ranging from 239.252.0.0 to

239.255.255.255.

When adding a device to the CMS (Client Management System) software, the multicast address

must be the same as the device’s multicast IP.



RTSP Port

: The RTSP (Real Time Streaming Protocol) is a network control protocol designed for

use in entertainment and communications systems to control streaming media se rvers.

Enter the RTSP port in the text field of

RTSP Port

. The default RTSP port is 554, and you can

change it according to different requirements.



Server Port

and

HTTP Port

: Enter the

Server Port

and

HTTP Port

in the text fields. The default

Server Port is 8000 and the HTTP Port is 80, and you can change them according to different

requirements.

The Server Port should be set to the range of 2000-65535 and it is used for remote client software

access. The HTTP port is used for remote IE access.

Figure 9. 22

Configure More Settings

Click the

Apply

button to save and exit the interface.

Summary of Contents for TVIDVR16

















































































































































































Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands

Northern TVIDVR16, User Manual

Search results

Summary of Contents for TVIDVR16

Reviews:

Related manuals for TVIDVR16

Brands by name

Popular brands