Page15
3.3.3 HD-TVI Camera Test
(1)
Connect the camera video output to the CCTV Tester TVI BNC to display the image on the
tester. Tester only supports TVI IN it does not support TVI OUT function.
(
2
)
Connect the camera or the speed dome RS485 controller cable to the tester RS485 interface,
(Note positive and negative connection of the cable).
3.3 OSD menu
Press the key
2 seconds to turn on
Press the key
2 seconds to turn off
Quickly press the key to enter sleep mode, quickly press it again to test to exit sleep
mode. and cannot be turned off , Press and hold the key for several seconds to reset the
tester, it will turn off and you will need to press the key to restart the tester.