Page6
receiver, Or install the testing software in the PC firstly, then work with one IPC tester to test the
network channel bandwidth.
2.3.19 IP Address Scan
In digital IP surveillance applications, if IP camera’s IP address is not clear or forgotten; the device
cannot be used .IP address scan can quickly search the connected IP camera or other network device’s
IP address.
2.3.20 PING Test
PING is the most conventional network debugging tools; It is used for testing if the connected IP
camera or other network equipment’s Ethernet port is working normally and the IP address is correct.
2.3.21 Port Finder
The tester will send special signals to make the connected POE port flicker at special frequency, which
will enable the installers to easily and quickly find the connected ethernet cable. This function can
prevent mistakenly insertion or disconnection non-corresponding cable to artificially interrupt network
connection.
2.3.22 PoE Test
It can test the PoE voltage when the POE switch is supplying the POE power to IP camera. It can
clearly display the power+ and power- on the Ethernet cable pins, each cable pin’s voltage and the
failure connection of cable pin series numbers.
2.3.23 LED Lamp
It is useful for the user to install and maintain security system at night. Press button LED On/Off, easy
operation.
2.3.24 OSD Menu Rotates in 180 Angle
OSD menu can be rotated in 180 angle by manual setting. This function is very convenient for the user
to upward the downside to connect the LAN cable and do the testing.