![background image](http://html1.mh-extra.com/html/northern/ip35tm/ip35tm_user-manual_1708323052.webp)
Page47
1 .Do not input any power into the “DC12/1A OUTPUT” port of the tester to avoid damaging the
tester.
2. Do not output the DC12V/1A power to the DC12V/IN port of the IP camera tester to avoid
damaging the tester.
3. The IPC tester power output is close to 1A, if the IP camera’s power is over 2V, the tester will
auto enter protection mode. Disconnect all the connections of the tester and then connect the tester
with power adaptor to resume the tester.
4.
Make sure the tester is full charged or more than 80%, otherwise the tester will shows “low
power”, “not able to supply power”
3.3.24 Application Tools
It contains Audio record, Network Bandwidth test , DHCP, Notepad, Link Monitor, etc.
Click the icon to enter.