Page58
3.4
DC12V 1A
Power Output
Touch function ,enters power output interface
“DC12V/1A OUT ”is a power output interface it uses the tester’s battery and requires power convert
cable ,the smaller end of the convert cable to connect to DC12V/1A OUTPUT, the other end connect to
camera power input interface.
Power output function is mainly used in the field for camera demonstration and testing, meanwhile, for
some camera installation sites, if there is no power outlet, the tester can offer temporary power for the
camera.
Notice:
a.
DO NOT input any power into the “DC12/1A OUTPUT” port of the IP camera tester to avoid
damaging the tester
b.
The IPC tester power output is close to 1A, if the IP cameras power is over 1A, the tester will
auto enter protection mode. . Disconnect all the connections of the tester and then connect the
tester with power adaptor to resume use of the tester.
c.
Make sure the tester is fully charged or the battery icon shows more than 3 bars; otherwise the
