Page38
“Video playback”, “PTZ control”, operation is the same as the video monitor function, Please refer to
the relevant instructions in section “3.3.1” if the manual. To access UTC control (if available on camera)
hit the enter button on the keypad. Note *you may be required to enter PTZ control first and select
Menu in the protocol settings.
Click or press to quit and return the main menu.
3.3.6 IP Address Scan
Connect the cable to the LAN port, click the icon to enter, set initial IP and destination IP
address. The tester’s IP address network segment can be the same or different from the scanned network
device’s network segment. Click the key “Start” to scan, quickly to search the IP address, you can
also
input the IP address in the
Port Number Scan to scan to port number, check the tested device’s
supporting port number and how many ports can support the device’s network communication..
3.3.7 PING Test
Connect the cable to the LAN port, click the icon to enter, select set local IP, Remote Host IP,
Packet Size, Packet time Timeout etc. and press “Start “to test. If IP camera or other network equipment
are not connected to the tester, the tester will show sending and receiving packet‘s quantity
inconsistency and Error rate 100%.