Northern Telecom Compact ICS 4.0 Manual Download

Page: 78 / 254

66 / Auto Attendant

Compact ICS 4.0 System Coordinator Guide

P0881596 Issue 02

Turning CCR on or off

ƒ•°‹¤

1. Press

ƒ•°‹¤. The display shows the

current status of CCR.

2. Press

CHANGE

£ and enter the System Coordinator

password or Basic password (the default passwords are

¤‹fl›fl and ¤¤‡›¤) to select a setting:

OFF

Bus. Open

, or

Bus. Closed

3. Press

• to confirm the change.

See the section on recording greetings for a description of the
Business Open and Business Closed greetings used with CCR.

Choosing the attendant telephone

Programming allows you to choose a telephone to be the
attendant telephone (attendant set). External calls that go
unanswered at this telephone are handled by System Answer.

You need the programming template found at the front of this
guide. See ‘‘Getting started with Norstar’’ on page 1 for more
information.

1. Press

ƒ••¤flfl‹››.

2. Press

¤‹fl›fl (the default System Coordinator

password). The display shows

Terminals&Setsˆ

3. Press

“ twice. The display shows

System

prgrmingˆ

4. Press

≠, ‘, and ≠. The

display shows the internal number of the current attendant
telephone.

5. Press

CHANGE

and enter the internal number of the

telephone you want to assign as the attendant telephone.

p0881596.book Page 66 Wednesday, November 18, 1998 4:50 PM

Summary of Contents for Compact ICS 4.0































































































































































































































































Search results

Summary of Contents for Compact ICS 4.0

Reviews:

Related manuals for Compact ICS 4.0

Brands by name

Popular brands

Northern Telecom Compact ICS 4.0, Manual

Search results

Summary of Contents for Compact ICS 4.0

Reviews:

Related manuals for Compact ICS 4.0

Brands by name

Popular brands