218 / Common feature displays
Compact ICS 4.0 System Coordinator Guide
P0881596 Issue 02
The line is in use. Make the call using normal
methods or wait until the line is free.
You have tried to make, receive or pick up a
call when no line button was available. Some
features require you to have a button free.
Releasing calls can free up line buttons.
The feature you tried to use requires you to
be on an active call at your telephone. This
display also appears when information about
a call has been cleared by a system reset.
All the lines or line pools available to the
telephone are in use. This display also
appears when you have tried to dial an
external number or use a feature that
conflicts with the lines, line pools or prime
line used by the telephone.This must be
corrected by your customer service
representative or installer.
The telephone has been set up to dial an
external number on a prime line but the
telephone does not have a prime line. This
must be corrected by your customer service
representative or installer.
You have tried to program redirection while
someone else is programming redirection.
Only one person can program line
redirection at a time.
The line you are trying to use for redirecting
calls is for incoming calls only. Choose an
outgoing line.
Continue entering digits. Press
√
or
BKSP
to delete incorrect digits. Press
˙
or
OK
when you are finished.
You have entered an invalid line pool code or
an invalid destination code.
You have selected a line that is private to
another telephone.
Line in use
No button free
Make calls first
No free lines
No line selected
In use:21
Incoming only
9__
QUIT
BKSP
OK
Invalid number
Line denied
p0881596.book Page 218 Wednesday, November 18, 1998 4:50 PM
