manualshive.com logo in svg

Northern Telecom Compact ICS 4.0, Manual

Share
Download
Northern Telecom Compact ICS 4.0 Manual Download Page 181

Telephone features / 169

P0881596 Issue 02

Compact ICS 4.0 System Coordinator Guide

Reply to a Ring Again signal

To connect with a Ring Again request when you are on 
a call (or your telephone is off-hook):

• Enter 

˚¤

. This automatically places 

your call on hold.

• To return to the caller on hold, enter 

˚

 

¤

.

To connect with a ring again request when your 
telephone is on-hook:

• Lift the handset. The Ring Again number is 

automatically redialed.

If you do not respond to the Ring Again signal within 30 
seconds, Ring Again is canceled.

Saved 
Number 
Redial

˚•fl‡

Allows you to save an external number while you are on 
a call or while the called telephone is ringing. To 
automatically redial the saved number:

• Enter 

˚•fl‡

.

System 
Speed Dial

˚•‚

 <plus the speed dial code>

Allows you to use a speed dial code to quickly dial 
preprogrammed telephone numbers. See ‘‘Using 
Speed Dial’’ on page 81 for more information.

You cannot program personal speed dial numbers for 
the telephone connected to the I-ATA.

Timed 
Release

˚•‡¤

Generates a longer Link signal. Use this feature when 
you want to release a call from your line but retain the 
use of the line for another call.

Transfer

Allows you to transfer a call. To transfer a call you must 
have an available intercom line.

• Enter 

˚•‡‚

.

• Enter the transfer destination number.
• Replace the handset.

To Transfer using Conference

• Enter 

˚¤

.

• Make the second call.
• Enter 

˚•‹

.

• Replace the handset.

Trunk Answer

˚•°‚‚

Allows you to pick up a ringing external call on a line for 
which Ringing Service is turned on.

p0881596.book  Page 169  Wednesday, November 18, 1998  4:50 PM

Summary of Contents for Compact ICS 4.0































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands