Using System features / 193
P0881596 Issue 02
Compact ICS 4.0 System Coordinator Guide
You need the programming template found at the front of this
guide. See ‘‘Getting started with Norstar’’ on page 1 for more
information.
1. Press
ƒ••¤flfl‹››.
2. Press
¤‹fl›fl (the default System Coordinator
password).
3. Press
≠ at
Terminals&Sets
.
4. Enter the internal number of the telephone you want to
program and press
≠. The display reads
Capabilities
.
5. Press
≠.
6. Press
‘ until the display reads
Hotline
.
7. Press
CHANGE
to select the type of call the hotline makes:
None, Intrnl
, or
Extrnl
.
Internal assigns an internal number.
External assigns an external number. If you select an external
number, you can select the line on which the call is made: the
prime line, an external line, a line in a line pool, or a line
selected by the routing table. If you select a line pool, you have
to specify the line pool access code. If you select the routing
table, the number dialed is treated as a destination code and is
routed according to the routing tables.
A telephone's prime line, line pool access codes, and access to
a line pool can be programmed by your installer or customer
service representative.
p0881596.book Page 193 Wednesday, November 18, 1998 4:50 PM
