Frequently used programming operations / 17
P0881596 Issue 02
Compact ICS 4.0 System Coordinator Guide
Select a line for the speed dial code
If you assign a specific line to a system speed dial number, only telephones with
an appearance of that line can use the speed dial number.
Choose what shows up on the display
Program a name for a speed dial
The system has a standard name to display, so it is not necessary for you to
program one. However, if you have chosen not to display the telephone number,
you may want a specific name.
Your display shows the telephone number, and not
n’s as shown here. Press
OK
.
Press
‘
.
Press
CHANGE
to see your options:
Use prime line
,
a
specific line (for example
Use line: 01
), a line pool
(for example
Pool code:71
), or
Use routing tbl
.
Stop pressing
CHANGE
when the display shows the prime line again.
In this example, the system selects the prime line
automatically (the most common choice), to dial
speed dial code 01.
Press
‘
.
Your choices are Yes and No. Yes means the display
shows the telephone number. Press
CHANGE
.
No means the display shows a name for the code.
Press
‘
.
01:nnnnnnnn__
CANCL
BKSP
OK
01:nnnnnnnn
CLR
CHANGE
Use prime line
CHANGE
Use prime line
CHANGE
Use prime line
CHANGE
Display digits:Y
CHANGE
Display digits:N
CHANGE
Display digits:N
CHANGE
p0881596.book Page 17 Wednesday, November 18, 1998 4:50 PM