Nortel Remote Office 9150, Installation And Administration Manual

Page: 76 / 570

48 Remote Gateway 9150 Installation and Administration Guide
Planning for Remote Gateway 9150 unit installation Standard 4.0
Remote Gateway 9150 Installation Checklist
Page 3 of 4
✓
Task For details, refer to
❒
Install the software from the product
CD-ROM or the Nortel web site. “Installing the Configuration
Manager software” on page
113.
❒
Configure the IP address, subnet mask,
and default gateway on the Remote
Gateway 9150 unit. “Using the Configuration
Wizard to perform initial
configuration” on page 115.
❒
Configure the following items, as
required, to create the communication
paths between the Remote Gateway
9150 unit and the RLC:
„
IP network: RLC’s IP address
„
PSTN:
— RLC’s telephone number
— primary trunk
„
security level and, if required,
security identifier
„
“Using the Configuration
Wizard to perform initial
configuration” on page
115
„
“Security level
configuration” on page
200
❒
PING the Remote Gateway 9150 unit
and ensure that it is recognized as a
device on the network. “Testing the network
connections” on page 129.
❒
Ensure that the Remote Gateway 9150
unit’s connection information is
completed on the RLC. the Reach Line Card
Installation and
Administration Guide
(NTP 555-8421-210).
❒
Configure user stations with
appropriate calling permissions and
features. “9150 port configuration” on
page 207.