Nortel Remote Office 9150, Installation And Administration Manual

Page: 244 / 570

216 Remote Gateway 9150 Installation and Administration Guide
Configuring the Remote Gateway 9150 unit Standard 4.0
Note: Your primary DN is used to conference a local call. The Bridge Port
connects the local user to the host PBX, the Remote Gateway 9150 unit connects
your primary DN to the host PBX, and the Conference feature on the host PBX
ties it all together.
Scenario 1
The reception digital telephone set (L2000) answers all local BRI calls. Calls
that are not answered use a Bridge Port to transfer to a dedicated remote site
voice mailbox for the entire Remote Gateway 9150 unit.
„
Local BRI calls ring the local key(s) of a reception telephone (L2000).
„
These calls, when unanswered, call forward-no answer according to the
Remote Gateway 9150 unit’s 9150 Port Configuration property sheet
settings to a PBX Phantom TN (5000).
„
This PBX Phantom TN forwards after one ring to the voice mail target DN
(8000).
„
A designated mailbox, such as mailbox number 5000, is built in voice mail.
„
An Extended Message Waiting Key (XMWK) of 5000 on the reception
telephone notifies the user of voice mail messages left from Remote
Gateway 9150 unit BRI calls.
Note: An XMWK can be added to any or all digital telephone sets attached
to a Remote Gateway 9150 unit.
host PBX
WAN or PSTN
9150
Reception - DN 2000 with local key
L2000, call forward-no answers to
Phantom DN 5000 on PBX through
Bridge Port. Telephone also has an
Extended Message Waiting Key
(XMWK) of 5000.
RLC
BRI circuits alert local
key L2000 on
reception telephone
Voice
Mail
(8000)
Voice
Mail
(8000)
Voice Mail
System
Build a Phantom TN
on in the PBX
For example: DN=5000
forward 1 ring to voice
mail DN (8000)
Remote Gateway 9100 Series
Bandwidth Connectivity
9150
Bridge
Port(s)
9150
Bridge
Port(s)
1
2
3
4
5
PSTN caller gets voice
mail greeting from
mailbox 5000
6
7