Nortel Remote Office 9150, Installation And Administration Manual

Page: 300 / 570

272 Remote Gateway 9150 Installation and Administration Guide
Using Remote Gateway 9150 stations Standard 4.0
Release and Try
Again
All Remote Gateway 9150 trunks are busy or there
are not enough DSP resources to process the call.
Try again at a later time.
Note: Ensure the call you are placing is initiated
from the appropriate call appearance key:
„
host call appearance key: to call someone at the
host PBX site
„
local call appearance key: to place a local PSTN
call or to call another station at your site
Bandwidth Limit
If this message displays on your station and you hear
a fast busy signal when you attempt to place a call,
then there is insufficient PSTN bandwidth.
Wait a moment, and then try your call again.
DSP Limit
If you see this message and hear a fast busy signal
when you attempt to place a call, then Digital Signal
Processor (DSP) resources are all busy.
Wait a moment, and then try your call again.
Call Failure
If you see this message and hear a fast busy signal
when you attempt to place a call, then the Remote
Gateway 9150 unit failed to establish the PSTN
connection to the RLC.
Wait a moment, and then try your call again.
Message Description