Nortel Remote Office 9150, Installation And Administration Manual

Page: 305 / 570

Remote Gateway 9150 Installation and Administration Guide 277
June 2005 Using Remote Gateway 9150 stations
Going online and offline
Stations at the Remote Gateway 9150 site operate in either online mode or
offline mode. This is controlled by one or both of the following:
„
SPRE codes to manually toggle all stations at your site between online and
offline modes
„
an online/offline schedule on the host PBX to automatically toggle all
stations at your site between online and offline modes
For a description of the online and offline modes, refer to “Modes of operation”
on page 260.
Using the SPRE code to put all stations into online mode
To use the SPRE code to put all stations into online mode:
1 Lift the digital telephone handset, or press one of the local call appearance
keys.
2 Press the octothorpe key (# in North America) followed by the Online SPRE
code.
Note: To learn this code, consult with your system administrator.
Result: The connection to the host PBX is initiated and negotiated with the
host PBX. During this negotiation period (up to 5 seconds), stations at your
site cannot be used for host-controlled calls. When negotiation is
completed and connection to the host PBX has been established, Online
Mode displays on the telephone display.
Using the SPRE code to put all stations into offline mode
To use the SPRE code to put all stations into offline mode:
1 Lift the digital telephone handset, or press one of the local call appearance
keys.
2 Dial the pound key (# in North America) followed by the Offline SPRE code.
Note: To learn this code, consult with your system administrator.
Result: Offline Mode displays on the digital telephone set.