Nortel Remote Office 9150, Installation And Administration Manual

Page: 511 / 570

Remote Gateway 9150 Installation and Administration Guide 483
June 2005 Display log definitions
Statistic Definition
LOG NUMBER 85
DESCRIPTION This log indicates that a voice/modem DSP load attempt has Failed,
indicating a possible hardware problem.
If this log entry is not followed by log entry 83, the DSP is out of
service for the duration of the session (that is, until RESET or power-
cycle).
On the 911x, this message indicates failure of the only DSP and
represents a CRITICAL failure.
SEVERITY MAJOR (CRITICAL on 911x)
TASK VPM
PRODUCT RLC, 9150, 911x
CANCELLATION Log number 83 (DSP load successful)
ACTION TO BE TAKEN 1) Swap DSP module slot positions to see if the failure follows one
DSP module. Report failures to on-board DSPs (Module 0) to
Nortel.
2) Check DSP status using Configuration Manager's Alarms/Stats/
Logs
→
DSP Statistics screen.
PARAMETERS 1) Single-digit DSP device ID
2) DSP module number
2) DSP device number
DISPLAYED TEXT DSP #P1 load failure. (P2, P3)
PRODUCES HOST PBX
ALARM AND ALERT Yes