Nortel M3905 Installation And Administration Manual Download Page 146

Page: 146 / 176

Page 146 of 174

Appendix A: Flash Download procedure

553-3001-216 Standard

5.00

January 2002

Note 1:

If the CD-ROM is not in the CD drive of the IODU/C, the

installation procedure will not continue. Insert the CD-ROM into the
drive to continue.

Note 2:

If a problem is detected duringthe system verification, Install

stops, prints an error message, and aborts the installation. If the
verification is not successful, do not continue. Contact your technical
support organization.

Press <CR> to continue.

Initiate the installation by selectingthe followingcommand from the
menu:

<u> to Install menu

Remove the CP Install Program diskette and insert the Keycode diskette,
when prompted.

<a> to continue with keycode validation

<y> to confirm that the keycode matches the CD-ROM release

When the Install Menu is displayed, select the followingoption:

<p> To install 3900 set Languages

The PSDL Installation Menu appears. Select:

2. List 3900 set languages

This displays the PSDL file that is currently installed on the machine and
the PSDL files are available to install.

Press <cr> until the main menu appears.

When the Install Menu is displayed, select the followingoption:

<p> To install 3900 set Languages

The PSDL Installation Menu appears. Select:

1. Install 3900 set languages

Summary of Contents for M3905

















































































































































































Search results

Summary of Contents for M3905

Reviews:

Brands by name

Popular brands

Nortel M3905, Installation And Administration Manual

Search results

Summary of Contents for M3905

Reviews:

Brands by name

Popular brands