Nortel Circuit Card, Installation Manual, Page: 362 / 908

Page 362 of 906 NT5D97 Dual-port DTI2/PRI2 card
553-3001-211 Standard 3.00 August 2005
Case 1 - The two ports of a QPC414 network card are connected to two digital
trunks.
In this case, the QPC414 and the two digital trunks are replaced by a single
DDP2 card, which is plugged into the network shelf in the QPC414 slot.
Case 2 - One port of the QPC414 card is connected to a digital trunk, and the
second is connected to a peripheral buffer. Both cards are in network loop
location.
In this case, the QPC414 should not be removed. The digital trunk is removed
and the DDP2 card is plugged into one of the two empty slots.
Figure 81
Clock Controller – Option 4
553-7402
Primary
Reference
Port 0
DDP2
Port 1
Clock Controller
for CPU 0
Clock Controller
for CPU 1
J1 Sec.
J2 Prim.
J1 Sec.
J2 Prim.
Primary Ref 1
Primary Ref 2
Secondary Ref 1
Secondary Ref 2
Both references from both ports
clk 0
clk 1
Clk0
Clk1
Secondary
Reference