MCP core software load patch installation
79
Procedure Steps
Step
Action
1
Log on to the primary System Manager as the AA role
(ntappadm) using SSH.
2
Change directory:
cd /var/mcp/install
3
Run the patching script:
./mcpPatch.pl
The progress of the patching process displays. The database is
patched first, followed by the System Manager.
When the database and System Manager are patched, the
System Manager restarts.
4
Log on to the MCP System Management Console.
The System Manager is started and in the Active state, running
on the desired load.
--End--
Patching the Network Elements
Use this procedure to patch the Network Elements. If a Network Element
is supported in a fault tolerant mode such as a Session Manager, one
instance will be in active state and the other one will be in hot standby
state. When the active instance is shut down to be patched, the standby
instance becomes active to prevent loss of service.
For non-fault tolerant Network Elements, such as Provisioning Manager,
the service provided by the Network Element is impacted during the patch.
For more information about Network Elements and their associated service
impacts during patch upgrades, see
Table 11 "Service impacts to Network
Elements during patching" (page 79)
.
Table 11
Service impacts to Network Elements during patching
Network Element
Client impact
Subscriber impact
Accounting
Managers
When the accounting manager
is stopped, billing information
continues to be cached on the
session manager servers as
disk space allows. After the
Accounting Manager is back in
service, the cached information
None.
Application Server 5300
Nortel AS 5300 Installation
NN42040-300
01.04
4 November 2008
Copyright © 2007-2008 Nortel Networks
.
Summary of Contents for Application Server 5300
Page 123: ......