manualshive.com logo in svg

Nortel 1000BASE-XD, Using Manual, Page: 83 / 100

Share
Download
Nortel 1000BASE-XD Using Manual Download Page 83

204515-C

C-1

 

Appendix C

Media Dependent Adapters

This appendix describes the media dependent adapters (MDAs) that are available 
from Nortel Networks. The MDAs can support high-speed connections to servers, 
shared Fast Ethernet hubs, or backbone devices.

The following MDA versions are available for the Passport 8132TX Edge Switch 
Module:

•

450-1SR MDA—1000BASE-SX MDA (1-port shortwave gigabit fiber, 
with 1 redundant port)

•

450-1SX MDA—1000BASE-SX MDA (1-port shortwave gigabit fiber)

•

450-1LR MDA—1000BASE-LX MDA (1-port longwave gigabit fiber, 
with 1 redundant port)

•

450-1LX MDA—100BASE-LX MDA (1-port longwave gigabit fiber)

•

8100-4TX MDA—10BASE-T/100BASE-TX MDA (4-port copper)

•

8100-2FX MDA—100BASE-FX MDA (2-port multimode fiber with 
SC connectors)

•

8100-4FX MDA—100BASE-FX MDA (4-port multimode fiber with 
MT-RJ connectors)

Nortel Networks continually adds new models and features to existing product 
lines; see your Nortel Networks sales representative for a full range of available 
MDAs that may have been added after the release of this guide. Each MDA 
shipment comes with installation instructions.

Summary of Contents for 1000BASE-XD





































































































Reviews:

No comments