Nortel 1000BASE-XD, Using Manual

Page: 50 / 100

Using the Passport 8100 Modules
3-6
204515-C
Setting System Security
System security parameters allow you to define login names and passwords for
access to the switch management functions and to specify the access methods,
such as through a Telnet session or through a Web browser.
To set system security:
1.
Change CLI users and passwords using the following commands:
•
config cli password ro <username>[<password>]
—changes the
Read-Only login and/or password.
•
config cli password l2 <username>[<password>]
—changes the
Layer 2 Read-Write login and/or password.
•
config cli password rw <username>[<password>]
—changes the
Read-Write login and/or password.
•
config cli password rwa <username>[<password>]
—changes the
Read-Write-All login and/or password.
where:
username
is the login name.
password
is the password associated with the login name.
2.
Change SNMP community strings using the command:
config sys set snmp community <ro|rw|l2|rwa> <commstr>
where:
<ro|rw|l2|rwa>
is the choice of community—
ro
is Read-Only,
rw
is
Read-Write,
l2
is Layer 2 Read-Write, and
rwa
is Read-Write-All.
<commstr>
is the input community string {string}.
3.
Enable or disable Web access using the commands:
•
config web-server disable
to turn off Web access
•
config web-server enable
to turn on Web access