Norland Elite 437A150, Operator'S Manual

Page: 307 / 490

Operator's Guide
437D140 Rev. I
Additional Techniques 11-17
Active Database > Add to List
This command adds an existing database name to the drop-down list in the Database Navigator window (see
figure below). Upon completion, it becomes the active database in the Database Navigator window. The data-
base of interest must have been created using the Norland Windows-based software.
The “Add to List” command is used when the Database of interest was previously removed from the drop-down
list (but not deleted from the hard drive) and the operator wants to restore it.
1. Click File > Database > Active Database > Add to List.
2. In the Open Patient Database window, scroll down to locate the folder name of the Database being added
to the list.
3. Double-click on the folder to select it and write it to the path above the white box in the window.
4. Click . Notice that the Database becomes active in the Database Navigator window.