Norland Elite 437A150, Operator'S Manual

Page: 214 / 490

Setting the Scan Parameters
The photos used in these procedures are for a left hip scan. However these instructions are easily applied to a
right hip scan by adopting a mirror image of the patient positioning photos.
1. Click .
2. Click Left Hip (or Right Hip) in the pop-up window.
3. Click .
4. The Parameters tab window opens.
Figure 8-3: The Hip Scan Parameters tab window
5. The scan parameters are shown in the bottom left hand side of the Parameters tab window, and reproduced
here for reference. Norland recommends that the factory default parameter settings be used for scanning.
The default values are shown below.
Operator's Guide
437D140 Rev. I
8-8 Scanning Hip