Norland Elite 437A150, Operator'S Manual

Page: 115 / 490

Operator's Guide
437D140 Rev. I
Basic Operation 4-7
2. Position the Standard and the Phantom on the Scanner
a. Place the QA Calibration Standard on the scanner table and position it so that it is aligned with the cor-
responding marks on the scanner table surface. Point "A" on the calibration standard will face the head (to
the right) of the table.
Figure 4-6: Positioning the QA Calibration Standard and QC Phantom
b. Place the black QC Phantom on the scanner table in the marked location. The “C” on the box should be ori-
entated to the right side of the table (operator facing the table). Position the Phantom parallel to the back rest.