4.4 Bulk Editing
To send multiple values to the dispenser at once, you must use the Supervisor Mode.
1. Click FILE > SUPERVISOR MODE, or press CTRL + S at the main screen of the Ultimus V Interactive software.
2. Enter the password for Supervisor mode (Default: 0000).
The Supervisor password can be changed at the Ultimus V dispenser front panel keypad. The Ultimus V
dispenser and Ultimus V Interactive software must use the same password for correct operation.
3. After correct entry of the Supervisor password, a new tab called “Dispense Profile” appears. Use this tab to
send multiple values to the dispenser at once.
Enter the settings you want to send to
the dispenser, from Memory cell 0 up
to 399. You can enter settings for the
following parameters:
• Dispense Time
• Dispense Pressure
• Vacuum
• Trigger Value
Click TRANSMIT PROFILE to send all
the settings to the dispenser.
See the Dispense Profile Graph for Dispense
Time, Dispense Pressure, or Vacuum with
respect to Cumulative Trigger.
Appendix B — RS‑232 Protocol (continued)
Ultimus V Interactive Software (continued)
Ultimus V High Precision Fluid Dispenser
80
www.nordsonefd.com [email protected]
800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.