4. Ultimus V Interactive Software
The Ultimus V Interactive Software facilitates RS-232 communication. It is especially useful for bulk editing of the
Dispense Time, Dispense Pressure, Vacuum, and Trigger Value settings.
NOTE:
For physical connection instructions, refer to “1. Physical Connection” on page 39.
4.1 Installation
1. Download the Ultimus V Interactive software from the following address:
https://www.nordson.com/en/divisions/efd/contact-us/ultimus-interactive-software
NOTE:
The name of the file will be “UltimusVInteractive_3_0_Installer.zip,” or a higher version.
2. Unzip the file in the folder where you want to store the program.
4.2 Opening the Software
Open the “UltimusV_Interactive_Remastered.exe” file from inside the extracted folder.
You should see the following elements (as shown from the bottom left corner of the software screen):
• Connection status messages from the Ultimus V Interactive software to the Ultimus V dispenser:
- Not Connected to Ultimus V
- Connect First!
- Connected to Ultimus V
• COM port number (COM1, COM2, COM3, etc.)
• Baud Rate selected: 115200, 38400, 19200, 9600
• Operator Mode / Supervisor Mode
Appendix B — RS‑232 Protocol (continued)
Ultimus V High Precision Fluid Dispenser
77
www.nordsonefd.com [email protected]
800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.