RV Series Automated Dispensing Systems
122
www.nordsonefd.com [email protected]
+1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Appendix A, Command Function Reference
(continued)
Stop Point
Click
Function
Registers a Stop Point at the current XYZR location. When this command occurs, the dispensing tip moves to
the registered location and waits until the START or CONTINUE button is pressed.
Trig Mark
Click
Function
Double-click
address and
select from
drop-down
menu
This command is not used on RV Series systems.
Var
Click
Function
Double-click
address and
select from drop-
down menu
Allows a numeric value to be assigned to a symbol or character; once assigned, the symbol or character
can be used in a program in place of the numeric value. A set command can also be used to cause the
system to increase or decrease a coordinate by the assigned numeric value. Var can be used with the Find
Mark and Fiducial Mark commands.
Parameter
Description
Symbol
Enter the symbol or character that will represent the assigned Value
Value
Enter the numeric value that the symbol or character represents
Example of a program that includes a Var command
Wait Point
Click
Function
Registers a Wait Point to occur immediately after the previous command. When this command occurs, the
dispensing tip waits at the end point of the previous command for the specified Wait Time (in seconds).