RV Series Automated Dispensing Systems
44
www.nordsonefd.com [email protected]
+1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Setting Password Protection
Use the Password portion of the System Setup screen to set or reset a password. The purpose of a password is to
protect the system settings from unauthorized editing.
NOTES:
• The default is no password protection.
• If the password is forgotten, contact your Nordson EFD representative for assistance.
• A password is limited to 16 numbers or characters.
#
Click
Step
1
>
• Click SYSTEM SETUP > OPEN.
2
>
• Under Password, enter a password or make the field blank to
remove a password, then click CHANGE PASSWORD.
The system confirms and immediately implements the
password change:
- If a password was entered, the system will prompt for the
password before opening the System Setup screen.
- If the Password field was blank, no password will be required
to open the System Setup screen.
Item
Screen Capture
Description
Model drop-
down menu
Sets the dispensing software configuration; this setting must match the
system configuration (model). Any change takes effect upon software
restart.
Expert
For advanced users only.
Light (if
present)
•
Default:
Allows you to control the light intensity if an external switch is
used to control the light.
•
Offset:
When the system is in the CCD Mode, automatically changes
the light intensity based on the value entered.
NOTE:
The Light settings are present only if an optional light accessory
is installed.
Setting System Parameters (continued)
System Setup Screen Fields (continued)
