LA 404 Pattern Control System
65
Part 1037527
B
!
200
5
Nordson Corporation
Manual 66-LA404-MA-01
A feature of the pattern control that handles pallet-stabilization
applications. Use this feature to set the number of consecutive
products that receive adhesive and the number of consecutive
products that are skipped before pattern generation starts again.
All of the beads produced by a single gun.
Refer to
Photosensor
.
A device that detects products as they travel along the
production line.
The distance from the start of one bead to the start of the next
bead or, in the case of custom bead types (stitched beads, dot
beads, or modulated beads), the distance from the start of one
sub-bead to the start of the next sub-bead
.
The ability of the pattern control to simultaneously track the
position of several products as they move from the trigger to the
guns. This feature allows the user to install the sensor farther
from the guns, space products closer together, and run the
production line faster.
Refer to
Recipe
.
Test value for pressure.
Preset run-up value that automatically engages when purging.
The process of removing trapped air or material from the
adhesive gun or nozzle, or of relieving system pressure by
turning the gun (or guns) on.
A custom bead type that the pattern control can generate. The
random-length feature allows the user to apply a continuous
bead of adhesive to products of different length. If desired, set a
gap at the leading and trailing edges of the product where
adhesive will not be applied.
All of the pattern settings and associated parameters for applying
adhesive during a single production run. A program includes the
measurements that define a pattern set and may include
volume-control settings (if the run-up feature is purchased and
installed), optional settings such as the low-line-speed warning,
and custom bead settings such as stitching or modulation.
A feature that allows the user to test-fire the gun connected to
any of the four pattern-control outputs. Using this button and
associated DIP switches, one output or any combination of the
four outputs can be activated.
A pressure variation feature that varies pump output as line
speed changes to provide a consistent bead volume.
The glue gun stops when the machine stops, but will not start
again until the photocell detects a trigger to begin a new gluing
cycle
.
Palletizing
Pattern
Photocell/Photohead
Photosensor
Pitch
Product Queuing
Program
PSI Value
Purge Pressure
Purge
Random-length Bead Type
Recipe
Remote Purge
Run-Up Control
Run Mode
Summary of Contents for LA 404
Page 28: ......
