LA 404 Pattern Control System
66
Part 1037527
B
!
200
5
Nordson Corporation
Manual 66-LA404-MA-01
Refer to
Trigger
.
The glue gun stops when the machine stops, and resumes to
complete the current gluing cycle when the machine restarts.
The duration of high voltage or current spike at the initiation of an
electric gun firing.
Refer to
Dot Bead Type
.
Refer to
Dot Pitch
.
Refer to
Dot Time
.
Refer to
Modulated Bead Type
.
This feature allows the reduction of adhesive usage by entering
the percentage of glue savings. The pattern control
automatically determines the correct length and spacing of the
sub-beads in the bead pattern. Refer also to
Sub-Bead
.
A bead that results when the pattern control divides a continuous
bead into smaller spaced beads. Sub-beads are used in the
generation of custom bead types (stitched beads, dot beads, and
modulated beads).
The product edge that causes the trigger to stop sensing the
product as the product passes by the trigger. Refer also to
Leading Edge
.
A device that receives an analog current signal from the pattern
control and uses it to regulate air pressure. A transducer is used
only in systems equipped for run-up control. Refer also to
Run-Up Control
.
A photosensor that detects products as they travel along the
production line. The pattern control can be equipped with one or
two triggers, depending upon the requirements of the DC
application.
Distance that a photosensor passes from the trigger edge to the
other edge of the product. The photosensor is disabled for the
distance entered for the lockout value, thereby preventing
unwanted triggering caused by any holes or contrasting colors on
the product.
A user-determined setting (T-MEM) that allows the user to either
apply or not apply adhesive to products between the trigger and
the guns when line speed recovers after falling below the
minimum-speed setting. If a minimum speed is set, the pattern
control will stop generating patterns whenever the line speed falls
below this speed.
Sensor
Set Mode
Spike Time
Spot Glue/
Spot Mode/Spot Pattern
Spot Pitch
Spot Time
Spotting
Stitched Bead Type
Sub-Bead
Trailing Edge
Transducer
Trigger
Trigger Mask
Trigger Memory Mode
Summary of Contents for LA 404
Page 28: ......
