LA 404 Pattern Control System
43
Part 1037527
B
!
200
5
Nordson Corporation
Manual 66-LA404-MA-01
,=<76A!R?=7
+:=5:!(=>!!!!!!!!!!!!@!AA!
!
+:6>!(=>!!!!!!!!!!!!!@!AA
6640021A
1. To set start gap:
a. Press the
%
or
&
button for the cursor to appear beside the numeric
value.
b. Press the
"
or
#
button to set the desired value from 0 – 8191 mm.
2. To set stop gap:
a. Press the
%
or
&
button for the cursor to appear beside the numeric
value.
b. Press the
"
or
#
button to set the desired value from 0 – 8191 mm.
Dot Beads
When this bead type is enabled, the normal bead duration is broken into
dots. The size of each dot is programmed in 0.1 ms increments with a
maximum value of 50.0 ms. The spacing between the dots (pitch) is
programmed in millimeters from 2 – 999 mm. Once the dot bead is
selected, all the beads for that channel will be in dot mode. In this mode the
start position of the dot pattern will be speed compensated but the size of
the dot is not.
NOTE:
Interval (also known as pitch) is the distance from the start of one
bead to the start of the next bead
.
6640040A
178 mm (7.0 in.)
Time
10 ms
5 ms
2 ms
Pitch = 25 mm (1.0 in.)
Dur 1
Figure 12 Effect on Dot Size of Decreasing Gun–On Time from 10 ms (top) to 2 ms (bottom)
Summary of Contents for LA 404
Page 28: ......
