Nordson AltaBlueA4TP, Customer Product Manual

Page: 48 / 276

Setup key
Installation
3-20
Part 1107600_03 2014 Nordson Corporation
Selecting Operating Parameters
Table 3‐5 provides a complete list of the operating parameters. Review the
list to determine which operating parameters would best support your
manufacturing process. Refer to Appendix B,
Operating Parameters , for
detailed information about each parameter. Appendix B contains a complete
description of each parameter, including its affect on the melter, default
value, and format.
NOTE: Parameters that are used to configure optional equipment or that are
otherwise reserved in the firmware are excluded from Table 3‐5.
NOTE: Motor control parameters are set differently from operating
parameters. Refer to Setting Up the Motor Control later in this section. Some
applications will require a change to one or more motor control parameters.
Reading or Editing Operating Parameters
Regardless of whether a parameter's value is editable or not, the procedure
for accessing each parameter in order to read or edit its current value is the
same.
To read or edit a parameter
1. Switch the melter on .
The melter performs a start‐up check.
2. Press the Setup key.
The left display flashes parameter 1.