Nordson AltaBlueA4TP, Customer Product Manual

Page: 76 / 276

Component keys
Operation
4-2
Part 1107600_03 2014 Nordson Corporation
More about Heated Components
The melter contains three groups of heated components. These are the tank
group, which contains the tank and the pump, the hose group, and the gun
group. Component groups are represented on the control panel by the
component keys shown to the left.
Heated components within each group are identified by their position
number. The position of the tank and pump is fixed at 1. Hose and gun
position numbers are automatically assigned based on the hose/gun
receptacle they are connected to. For example, the position numbers of a
hose/gun pair that is connected to the second receptacle would be hose
position 2 and gun position 2.
The number of hose/gun receptacles available on each melter depends on
the configuration in which the melter was ordered. AltaBlue melters may have
either two or four hose/gun receptacles.
NOTE: In some installations, auxiliary devices (such as a heated air
manifold) may be connected to a hose/gun receptacle. In such cases, you
should label (or otherwise identify) the auxiliary device as to the hose or gun
position number that represents the device. The control panel will identify
such devices as a hose or gun, regardless of what the device actually is.