Nordic ATWC Series, Installation And Service Manual, Page: 48 / 106

PRELIMINARY: 24-Sep-2021 Page 48 002536MAN-00
Tools-->Parameters:
WARNING! The Parameters page is for advanced use only.
Changing parameter values can cause the system to stop functioning properly.
The parameters page shows all configurable memory spaces with their name and current value and allows them to be edited directly.
To change a parameter value type in the new value and press ENTER
.
Clicking on menu item
Tools-->Parameters
will
display this warning.
Click on YES to open the
parameters page.
Type in the new value
and press ENTER , the
confirmation popup will
appear, click on OK .
Click this button to reload the
table with the values from the
control board memory.
Tools-->SYSTEM TIMERS:
This page shows all internal timers by name along with their
current values.
Tools-->Jumpers:
This page shows internal jumper configurations, for developers.
NEEDS
UPDATE