Nordic ATWC Series, Installation And Service Manual, Page: 45 / 106

PRELIMINARY: 24-Sep-2021 Page 45 002536MAN-00
Tools-->Configuration (Alarms and Delays tab):
Click on the UP/DOWN arrows to change the value, noting that values have both a low and high limit.
Items that do not apply to
the model are greyed out.
Maximum Count is the
number of alarms al-
lowed before a perma-
nent lockout occurs.
Count Reduce Time is
the number of hours
after which the alarm
count is reduced by 1 if
no other alarm occurred
within the timeframe.
The number of minutes before
the unit can start again after a
normal shutdown
The number of minutes before the
unit can start again after various
alarm shutdowns
Ignore On Start is the number of
seconds an alarm will not be moni-
tored after a compressor start occurs.
The minimum off time when
switching between heating and
cooling cycles: can be set from 0
(switch on the fly) to 60 minutes
NEEDS
UPDATE