Nordco Super Claws LS-2, Operation And Maintenance Manual

Page: 23 / 78

Super Claws Model LS-2
PRE-OPERATION/STARTUP
MAR/2006 (4945-3500)
Section 3-7
MAIN CONTROL PANEL
ENGINE AND PUMP CONTROLS AND GAUGES
ENGINE AND PUMP CONTROLS
CONTROL OR
INSTRUMENT
INTERNATIONAL
SYMBOL FUNCTION
Key Switch The electrical system is energized by turning the key to
the right. Electrical power is cut off and the engine will
stop when the key is turned to the full left or vertical
(OFF) position.
MAGNETIC
OVERRIDE Switch This switch must be held in until engine starts and
engine oil pressure reaches 25 psi.
PUMP ON/OFF
Switch Turns on hydraulic pump. Engine will not start if this
switch is in the ON position when ignition switch is
turned. This is done to reduce engine load during
starting. After engine has started, turn on pump.
ENGINE SPEED
Switch
HIGH Speed
LOW Speed
Used during work, travel, and shutdown.
Used during normal work and travel operations.
Used for idling engine for extended periods of time, or
for idling engine for machine shutdown.
NOTE: The engine will not start if the engine speed
is set to high on starting.
EMERGENCY STOP Press button to shut down engine. Pull out button to
reset. See "EMERGENCY STOPPING" at the end of
this OPERATION section.