Nordco Super Claws LS-2, Operation And Maintenance Manual

Page: 8 / 78

SAFETY
Super Claws Model LS-2
Section 1-2
MAR/2006 (4945-3500)
GENERAL SAFETY TIPS
Only trained and authorized personnel
should be allowed to operate this machine.
In addition, all personnel at the worksite
(gang) should be aware of the safety
concerns and their individual
responsibilities
prior to working this
machine.
1.
Handle fuel safely. It is highly
flammable and prolonged
breathing of fumes may cause
bodily harm.
2.
Prepare for emergencies. Keep a
first aid kit and fire extinguisher
handy.
3.
Wear adequate protective gear:
a. Safety
Glasses
b. Good-fitting pants and shirt
c. Safety-toed work boots
d. Leather
gloves
e. Hard hat
SAFETY PRIOR TO WORKING
All personnel at the worksite (gang) should
be aware of the safety concerns and their
individual responsibilities
prior to working
this machine :
•
Review the operating instructions if
you are unsure of anything.
•
Use the “pre-operational checklist”
to check the machine for obvious
faults. Repair or replace as
necessary PRIOR to operating the
machine.
•
Before climbing onto the machine,
make certain the area around and
under the machine is clear of
obstructions and personnel.
•
Use care when climbing onto the
machine. Always use the steps
and handrails provided. (If an area
does not have tread grips,
walkways, or other methods to
access the area, then DO NOT
attempt to access that area.)
•
Make seat and control adjustments
PRIOR to starting the machine.
ALWAYS wear a seatbelt.
•
Know the weather forecast and
plan your work speeds accordingly.
•
There are guards on this machine.
These are to be removed ONLY
when service or maintenance is
being performed on that area of
the machine. Make certain they
have been re-installed PRIOR to
starting the machine.
•
Check and service the fire
extinguisher at regular intervals.
Make certain all personnel are
trained in its use. Note - Non-use
of fire extinguisher still requires
that it be recharged at the interval
stated on its last inspection notice.
•
Keep the stairs, cab entry platform
and cab interior free and clear of
ice, tools and personal items. Use
the accessories provided on the
machine (tool box, cup holder, coat
hook, etc.) to properly store your
gear.
•
Never climb onto the machine
while it is in motion.
•
There are lockups on this machine
that are used for both work and
travel. These should be kept clear
and free of debris, grease, etc.
See
Lockup section for
instructions on their use.
•
Inspect safety decals and replace
when they become unreadable or
are damaged. (See
“
Safety
Decals ” at the end of this Safety
section).