PRE-OPERATION/STARTUP
Super Claws Model LS-2
Section 3-2
MAR/2006 (4945-3500)
HYDRAULIC SYSTEM
The hydraulic system utilizes manifolded
hydraulics and a Vickers PVH Pump.
ELECTRICAL SYSTEM
The hydraulic functions of the machine are
controlled by the electrical system. The relays,
limit switches, micro switches and timing module
that make up the electrical system are shown on
the schematics and wiring diagrams included in
the
ELECTRICAL section
of this manual.
SEQUENCE CHART
The Functional Sequence Chart located at the
back of the Troubleshooting Section enables the
operator to identify what the machine is doing
and what hydraulic cylinders are activated in
relation to the energized or de-energized
condition of the micro switches or limit switches.
The sequence chart describes each complete
operating cycle, step by step, as it occurs during
actual operation.
CONTROLS AND INSTRUMENTS
Some controls and all of the instruments are
located on the Main Control Panel. Additional
controls are located remotely on the machine.
Become thoroughly familiar with the function and
operation of all controls, as described in this
section, before attempting to operate the
machine. However, the information in this
section is intended to be for descriptive purposes
only. Also read carefully the instructions in the
Operation
section of this manual
before
attempting to operate the machine.
NOTE
:
Your machine may not have all the optional
controls and instruments that are described in
this section.
Summary of Contents for Super Claws LS-2
Page 2: ......
Page 16: ...GENERAL Super Claws Model LS 2 Section 2 4 MAR 2006 4945 3500 Page Intentionally Left Blank ...
Page 76: ......
