the emission of pollutants into the environment), then rinse and dry thoroughly, where
possible clean with dishwashing machine.
• Do not clean the appliance with detergents containing chlorine, solvent-based cleaning
products (e. g. trichloro-ethylene), abrasive powders or agents, scouring pads or
sponges that could damage the surfaces. Do not use organic solvent substances or
essential oils. These substances could damage the parts of the appliance made from
synthetic material.
• Do not use products (even if diluted) containing chlorine (sodium hypochlorite,
hydrochloric or muriatic acid, etc.) to clean the floor under the appliance.
• Pay particular attention when handling the core probe; it is a sharp object, therefore
handle it very carefully during cleaning.
Preventive Maintenance
• Preventive Maintenance reduces downtime and maximizes machines efficiency.
Customer Care Service can provide advice on the best maintenance plan to be
purchased based on the intensity of use and the age of the equipment.
Repair and extraordinary maintenance
• Repair and extraordinary Maintenance have to be carried out by specialised authorised
personnel. The manufacturer declines any liability for any failure or damage caused by
the intervention of an unauthorized technician by the Manufacturer and the original
manufacturer warranty will be invalidated.
Parts and accessories
• Use only original accessories and/or spare parts. Failure to use original accessories
and/or spare parts will invalidate the original manufacturer warranty and may render the
machine not compliant with the safety standard.
Maintenance intervals
• The inspection and maintenance intervals depend on the actual machine operating
conditions and ambient conditions (presence of dust, damp, etc.), therefore precise time
intervals cannot be given. In any case, careful and periodical machine maintenance is
advisable in order to minimise service interruptions.
• It is advisable to carry out the checks with the frequency given in the following table:
Maintenance, inspections,
checks and cleaning
Frequency
Responsability
Ordinary cleaning
• general cleaning of machine
and surrounding area
Daily
Operator
Mechanical protection devices
• check their condition and for
any deformation, loosening or
removed parts
Every 6 months
Service
10