Notes:
The Engine Start function may not be
terminated if the battery charger detects
that the battery is at full capacity (fully
charged).
The Engine Start countdown process
can be terminated by pressing the Engine
Start Button again to stop the function.
The unit will revert to the Standby mode.
4. When “0” is reached, a beep will
sound. The LCD screen will show the
following (The upper digital display shows
the output current that is charging the
battery. The lower digital display shows “0
sec”. The Engine Start Icon flashes and
the Truck Icon, Clamp Icons and the
Battery Icon will light solid. The bars on
the Battery Icon will change from empty
to solid (bottom to top) repeatedly and the
Arrow Icons will gradually and repeatedly
move downward to the Battery Icon),
indicating the vehicle is ready to start.
5. Crank the engine using
manufacturer’s guidelines, typically in 3 to
5 second bursts. The lower digital display
shows “0 sec” (a 5-second countdown to
use as a timer when cranking the engine).
6. After cranking, the unit will
automatically adjust the charging current
to 2A for 5 minutes, and then revert to the
Charging Mode previously selected or
keep the charging current at 2A if there is
no Charging Mode previously selected.
IMPORTANT: The Engine Start function
requires a resting/cooling period between
attempts. Wait 5 minutes before a second
attempt at starting the engine, if needed.
7. When disconnecting the charger, do
so in the following order: Disconnect the
AC plug from the AC mains socket,
remove the negative black (–) clamp from
the negative (marked N or –) post of the
battery OR from the vehicle chassis, and
then remove the positive red (+) clamp
from the battery terminal.
UTILISATION
14
8
