Norac SPRA-COUPE 7000 Series, Installation Manual, Page: 18 / 42

16
4.4 M
AIN
R
OLL
S
ENSOR AND
T
ARGET
I
NSTALLATION
4.4.1 The Mounting Brackets
The brackets are designed to be very adaptable and allow for a wide range of
installations.
Figure 10 – Target Bracket
The Target Bracket ( Item B12 ) can be mounted in any direction around most sizes
of sprayer frame member and aimed using two ball and socket connections. The
dual ball connection also allows for a few inches of height adjustment while
allowing the rod to remain horizontal.
Figure 11 – Sensor Bracket
The Roll Sensor Bracket ( Item B11 ) can be mounted in any orientation on most any
frame member. The base can be mounted horizontal or vertical and be rotated
about 20 degrees. The tube can slide in and out of the base and be rotated to give a
great deal of mounting options. The mounting collar can also be slid along the tube
and rotated. The mounting tab can rotate perpendicular to the collar giving full
range of motion allowing the sensor to point directly towards the ground no matter
the angle or direction of the tube.