Nomadix AG 5500, User Manual, Page: 255 / 338

AG 5500
System Administration 243
Deleting Static Ports {Static Port-Mapping Delete}
Static Port-Mapping allows the network administrator to setup a port mapping scheme that
forwards packets received on a specific port to a particular static IP (typically private and mis-
configured) and port number on the subscriber side of the AG 5500. The advantage for the
network administrator is that free private IP addresses can be used to manage devices (such as
Access Points) on the subscriber side of the AG 5500 without setting them up with public IP
addresses.
This procedure shows you how to add static ports.
1.
From the Web Management Interface, click on
System
, then
Static Port-Mapping
Delete .
The Delete Static Port-Mapping Entries screen appears:
2. Enter the External IP Address and/or the External Port of the item you want to delete.
3.
Click on the
Delete
button to delete the static port, or click on the
Reset
button to reset
your changes to their previous state.
For more information about Static Port-Mapping, see also:
z
“Displaying the Static Port Mapping Table {Static Port-Mapping}” on page 158 .
z
“Adding Static Ports {Static Port-Mapping Add}” on page 241 .
ag5500_userguide.book Page 243 Tuesday, June 5, 2007 7:31 PM