Nomadix AG 5500, User Manual, Page: 153 / 338

AG 5500
System Administration 141
3. Enter the SNMP parameters (communities and identifiers), including:
z
System Contact
z
System Location
z
Get (Read) Community
z
Set (Write) Community
z
Trap Community
z
Trap Recipient IP
Your SNMP manager needs this information to enable network management over the
Internet.
4.
When finished, you must reboot the system for the new settings to take effect. Click on the
check box for
Reboot after changes are saved? to reboot the system after saving your
changes.
5. Click on the Submit button to save your changes and reboot the system, or click on the
Reset button if you want to reset all the values to their previous state.
You can now use your SNMP client to manage the AG 5500 via the Internet.
ag5500_userguide.book Page 141 Tuesday, June 5, 2007 7:31 PM